Clean Up with JUKI!

When was the last time you gave your machine some TLC? Today we’re going to go over some general tips on how to keep your sewing machine maintained and ready to sew! If your machine needs a deep cleaning, take it to a nearby sewing machine technician.

Let’s start with the basics: cleaning, oiling, and changing the needle.

External Cleaning

The best place to start cleaning is the outside of your machine. Turn all power is off and unplug your machine before removing the needle and presser foot. This is a safety precaution to save you from being pricked.

Grab a microfiber cloth and dampen just a little and get to work! Stay away from using any harsh chemicals on your machine or solvents. We recommend a small amount of dissolved detergent or dish soap if you find a stain that won’t come out.

For those hard-to-reach spaces, we recommend using your craft pipe cleaner. It’s best to do this at a slow pace to avoid unnecessary damage to your machine, especially near a spot with wires. This way, you can avoid bending or wrongly adjusting anything.

Internal Cleaning

Once the outside of your machine is looking clean, let’s move on to the needle plate area. While each machine is different, your manuals will display how to remove your needle plate. If you find yourself without a physical manual, remember JUKI places digital manuals on our websites.

Begin by removing the screws from your needle plate using a T-shape screwdriver. Next, place the screws somewhere safe and secure. We don’t want to lose any!

Once you have removed the needle plate and secured your screws, it’s time to dust! Here we recommend using the brush your machine comes with or grabbing that craft pipe cleaner to remove the lint and dust. If you find any loose threads, use your tweezer to capture those stray strands slowly.

*Never use canned air on your machine. This will cause dirt and lint to be pushed further into your machine rather than clean it.*

Once you’ve dusted the general area, it’s time to focus on your bobbin area. Your first step is to remove the bobbin case and shuttle hook. Once that’s removed, you’ll be able to clean the space behind it where lint and dust fall. Remember to be gentle in the process, your machine has many parts and tricks, and it’s best to go slow and easy when cleaning.

Our best recommendation is to service your machine regularly. A professional sewing machine technician will safely clean out those spots you might have missed and access parts we wouldn’t recommend doing yourself.

Needle Plate & Bobbin Area for DX-4000QVP

Oiling

The first thing to know about oiling is not all machines will need it. The best place to find your answer is in your manual. Remember, if you find yourself with a lost manual, JUKI uploads our machine manuals on our website!

Something to keep in mind is that non-computerized machines, like our TL series, need regular oiling. However, our machines like the DX series are computerized and self-lubricating, so you do not need to oil.

We recommend checking out our video here for maintenance and lubrication knowledge for our TL series.

If your machine requires oiling, your JUKI machine will come with a plastic container of sewing machine oil. You can also purchase this from your local sewing machine shops. Remember, your manual is your best friend! Requirements on where and how can be found there when it comes time to oil. We recommend applying one drop of oil to each arrow point shown above for every 4 to 8 hours of sewing. Use machine oil (New Defrix Oil No. 1) or similar supplied with the machine.

Changing the Needle

One of the most important things you can do is change your needle. Needled can dull, get bent, and become damaged, and it’s one of the most significant factors in your machine performance. We recommend changing your needle every 8 hours of usage or starting a new project.

A tip to keep in mind is that the flat side of the needle will usually face away from you on our DX series machines and face towards you on our TL machines.  recommended to check your manual. Always confirm that your needle is pushed up and that your screw is tightened to secure the needle in place.

Remember, depending on your project and fabrics is how you choose your needle. You want to make sure you’re using the right one for the job between different types of needles and sizes. This will lower the chances of needle breakage and machine error. Things to consider when choosing your needle are the fabric type, project idea, and thread.

When it comes to maintaining your machines, it’s best to take your time and go slow. If you’re ever in doubt about how to clean your machine, visit us on our JUKI Home Sewing Youtube page here.

You’ll be able to find maintenance videos on many of our machines and more! Don’t forget to stay tuned as we continue to launch new videos on JUKI machines and more.

One thought on “Clean Up with JUKI!

  1. This needs to be corrected. The flat side of the needle doesn’t face the sewer on the TL machines, it faces the right side of the machine!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s